Industrial Power Generator

Key Specifications/Special Features:

• Continuous output: 160kW/200kVA
• Standby output: 176kW/220kVA
• Rating definitions:
  • Continuous power model C with no suffix:
    • Applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power
    • There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hours in 12 hours
  • Standby power model C with suffix:
    • Applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure
    • No overload is permitted on these ratings
    • The alternator on this model is peak continuous rated (as defined in IS O8528-3) at 27℃
• Technical data:
  • Diesel engine model: Cummins-6CTA8.3-G2
  • Engine characters: water-cooled, in line, 6 cycles, direct injection, wet cylinder liner, and 1,500rpm
  • Constant output: 183W
  • Standby output: 204kW
  • Aspiration: turbo and after cooler
  • Bore x stroke: 114 x 135mm
  • Cubic capacity: 8.3L
  • Piston speed: 6m/s
  • Compression ratio: 16.5:1
  • Cooling system volume: 28L (only engine)
  • Maximum water temperature:: 100˚C
  • Speed characteristics: speed stability bandwidth is ≤±0.25%, steady governing rate is ≤1%
  • Fuel consumption: 43L/h
  • Lube consumption (prime): ≤0.24g/kWh
  • Intake air flow: 163L/s
  • Exhaust gas flow: 2,050m³/h
  • Exhaust temperature: 638˚C
  • Exhaust back pressure: 10kPa (maximum)
  • Alternator model: Stamford-UCI274F
  • Continuous output: 160kW/200kVA
  • Power efficiency: 93.3%
  • Voltage regulation: ±1.0% with 4% engine governing
  • Waveform distortion: no load: <1.5% and non-distorting balanced linear load: <5%
  • THF/TIF: <2%/<50
  • Fan cooling air flow: 216L/s
  • Length: 2,920mm
  • Width: 1,100mm
  • Height: 1,800mm
  • Net weight: 2,200kg

  Payment Details:

  Payment Terms:
  
  L/C, T/T
  
  Minimum Order:
  1 to 99 Set